Our Products

Showing 1 – 10 of 19 results Showing all 19 results Showing the single result No results found

Category





Sort by Name A - Z

Filters Sort results

Reset Apply

Image
Name
Description
Price
Quantity
Add to cart
9200DKB - 48"
Up to 20 Min Perimeter Seal

Product Features An NGP strike shim 9275 or 9225 is also required for proper latchbolt engagement Intumescent with PVC cover Modified acrylic pressure sensitive adhesive protected by release liner Provides high initial adhesion and long term holding power for permanent mounting in exterior or interior locations Resistant to aging, weathering, UV radiation, water, detergent, alcohol … Continue reading 9200DKB – 48″

CLC-NGP-9200DKB8

$76.00

Max:
Min: 1
Step: 1

Door Pressure Gauge
Inspection Tools

Range is from 0-35 Pounds Door Pressure Gauge instrument designed specifically to measure force. OPERATING INSTRUCTIONS Set the top (small) o-ring located on the plunger rod on zero, down against the instrument’s flange; or set the o-ring on the desired force. Holding the instrument firmly, press slowly against the door at a point approximately handle-high, … Continue reading Door Pressure Gauge

SUP-DCU-DOORPRESSGAUGE

$47.00

Max:
Min: 1
Step: 1

Relabelling

Quantity: Box of 25 labels REMEDI8 decommissioning label can be placed over the affixed fire-rated label informing the public and AHJ’s of the change in purpose for the door.  The decommissioning label has adhesive on both ends to cover the affixed fire-rated label, but does not deface the label in case of future re-purposing as … Continue reading Fire Door & Frame Decommissioning Labels 

LBL-FDS-DECOMLBL

$145.00

Max:
Min: 1
Step: 1

Fire Door Bottom Gap 9590 - 36”
Up to 90 Min Door Gap Solution

Product Features UL Certified for Door Bottom Gaps — Measuring up to 1-1/2″ 90-Minute Rated — for Use on UL10B and UL10C Wood or Hollow Metal Fire Doors Restricts the Passage of Smoke Patent Pending Available in 36″ and 48″ Lengths End Caps Furnished Standard Non-Handed Product consists of: #304 Brushed Stainless Steel, Neoprene Sweep— … Continue reading Fire Door Bottom Gap 9590 – 36”

CLC-NGP-9590-1

$399.00

Max:
Min: 1
Step: 1

Fire Door Bottom Gap 9590 - 48”
Up to 90 Min Door Gap Solution

Product Features UL Certified for Door Bottom Gaps — Measuring up to 1-1/2″ 90-Minute Rated — for Use on UL10B and UL10C Wood or Hollow Metal Fire Doors Restricts the Passage of Smoke Patent Pending Available in 36″ and 48″ Lengths End Caps Furnished Standard Non-Handed Product consists of: #304 Brushed Stainless Steel, Neoprene Sweep— … Continue reading Fire Door Bottom Gap 9590 – 48”

CLC-NGP-9590

$532.00

Max:
Min: 1
Step: 1

Fire Door Caulk
Door and Frame Caulk

Minimum purchase of 5 tubes. Fire Door Caulk is application certified on both hollow metal and wood fire-rated doors up to 90 minutes. Product can be used to fill up to a ½” diameter thru hole. Fully cured after 24 hours. After full cure, area can be sanded and painted. Product is tan in color; … Continue reading Fire Door Caulk (Case of 5 Tubes)

SUP-FDS-CAULK1

$210.00

Max:
Min: 1
Step: 1

Inspection Tools

The Fire Door Gap Gauge is a simple tool used by fire door industry inspectors to measure clearance requirements per the NFPA 80 code compliance.  Clearance requirements are the most recognized issue for fire door non-compliance.  The Fire Door Gap Gage will speed up your fire door inspections, is more accurate than a tape measure … Continue reading Fire Door Gap Gauge

SUP-PL2-GAPGAUGE

$50.00

Max:
Min: 1
Step: 1

Up to 90 Min Door Gap Solution

Product Features UL Certified for Head/Jamb Gaps — Measuring Over 1/8″, and up to 5/16″ 90-Minute Rated — for Use on UL10B and UL10C Wood or Hollow Metal Fire Doors Restricts the Passage of Smoke Non-Handed Available in 36″, 48″, 84″ and 96″ Lengths An NGP Strike Shim (9275 or 9225) may also be Required … Continue reading Fire Door Head/Jamb Gap 90 – 36″

CLC-NGP-GAP90KIT3'

$206.00

Max:
Min: 1
Step: 1

Up to 90 Min Door Gap Solution

Product Features UL Certified for Head/Jamb Gaps — Measuring Over 1/8″, and up to 5/16″ 90-Minute Rated — for Use on UL10B and UL10C Wood or Hollow Metal Fire Doors Restricts the Passage of Smoke Non-Handed Available in 36″, 48″, 84″ and 96″ Lengths An NGP Strike Shim (9275 or 9225) may also be Required … Continue reading Fire Door Head/Jamb Gap 90 – 48″

CLC-NGP-GAP90KIT4'

$274.00

Max:
Min: 1
Step: 1

Up to 90 Min Door Gap Solution

Product Features UL Certified for Head/Jamb Gaps — Measuring Over 1/8″, and up to 5/16″ 90-Minute Rated — for Use on UL10B and UL10C Wood or Hollow Metal Fire Doors Restricts the Passage of Smoke Non-Handed Available in 36″, 48″, 84″ and 96″ Lengths An NGP Strike Shim (9275 or 9225) may also be Required … Continue reading Fire Door Head/Jamb Gap 90 – 84″

CLC-NGP-GAP90KIT7'

$501.00

Max:
Min: 1
Step: 1

12